FAIRINO FR5-WML
List price $13,499
A long-reach welding configuration with 5 kg payload and 1,900 mm reach.
- Payload
- 5 kg
- Reach
- 1,900 mm
- Repeatability
- ±0.1 mm
- Axes
- 6

FR5-WML specifications
| Specification | Value |
|---|---|
| Payload | 5 kg |
| Reach | 1,900 mm |
| Repeatability | ±0.1 mm |
| Axes | 6 |
| TCP speed | 2 m/s |
| Arm weight | ≤45 kg |
| Protection rating | IP54 (IP65 optional) |
Which FR5 variant?
| Specification | FR5-WML This page | FR5 |
|---|---|---|
| Type | Welding variant | Standard series |
| Payload | 5 kg | 5 kg |
| Reach | 1,900 mm | 922 mm |
| Repeatability | ±0.1 mm | ±0.02 mm |
| TCP speed | 2 m/s | 1 m/s |
| Arm weight | ≤45 kg | 22 kg |
| List price | $13,499 | $8,699 |
- Choose the FR5 instead if you need the standard-series arm: same 5 kg payload, 922 vs 1,900 mm reach, tighter repeatability (±0.02 vs ±0.1 mm), slower TCP speed (1 vs 2 m/s), lighter arm (22 kg vs ≤45 kg), list price $4,800 lower.
What’s different about the FR5-WML
The FR5-WML is a long-reach welding version of the FR5. It differs from the standard FR5 in these points:
| Topic | FR5-WML | FR5 |
|---|---|---|
| Reach | 1,900 mm | 922 mm |
| Repeatability | ±0.1 mm | ±0.02 mm |
| Typical TCP speed | 2 m/s | 1 m/s |
| Base and shoulder speed | ±120°/s | ±180°/s |
| Wrist 3 rotation | 360° as standard | ±175° (±360° optional) |
| Arm weight | ≤45 kg | ≈22 kg |
| Footprint | 190 mm | 149 mm |
| Operating temperature | −20 to 45 °C | 0 to 45 °C |
Same as the FR5: 5 kg payload, IP54 (IP65 optional), mounting in any orientation, a safety box in the listed package, the same tool I/O and the same controller options.
Welding software. Welding machine setup, weaving, arc tracking and welding-torch TCP calibration are controller software features, not features of the welding variants. Ask which welding functions and peripherals your quote includes.
When to consider the FR5-WML
The FR5-WML is the longest-reach welding variant in this listed lineup. It is a candidate for larger weldments or fixtures when its tool-load allowance and motion envelope fit. Its working area also makes mounting position, cable routing, operator access, and safeguarding central to the cell layout.
Plan a potential application: Cobot welding. Selection depends on the complete tool load, motion path, process, and cell assessment.
Check these details before choosing
- Provide an assembly drawing or representative part showing all seams and fixture obstructions.
- Check torch angles and cable movement at both near and distant weld positions.
- Separate arm, welding equipment, positioner or fixture, extraction, integration, and acceptance testing in the budget.
Compare nearby FAIRINO options
| Model | Payload basis | Reach | Repeatability |
|---|---|---|---|
| FAIRINO FR5-WML | 5 kg | 1,900 mm | ±0.1 mm |
| FAIRINO FR3-WML | 3 kg | 922 mm | ±0.05 mm |
| FAIRINO FR20 | 20 kg | 1,854 mm | ±0.1 mm |
What to include in your FR5-WML quote
Request an itemized configuration and a complete project scope. Ask which items are supplied, optional, or your responsibility:
- Robot designation, controller, programming interface, cables, and software options.
- Welding source and interface, torch package, fixtures or positioner, and extraction.
- Mounting, machine interfaces, safeguarding, integration, and commissioning.
- Representative acceptance tests, operator training, delivery terms, warranty, and support responsibilities.
Share part dimensions, total carried load, a layout, and your cycle target. The response can then address a defined application rather than an arm-only price.
Discuss your applicationTechnical documents for FR5-WML
Use the manufacturer documents to review the mounting, load arrangement, and control package. Ask for documentation matching the exact robot and software version in your quote.
Guides for this decision
Your process.
Our next conversation.
Tell us what you want to achieve. Get practical guidance on robot selection, application planning, and the next steps toward a successful automation purchase.