FAIRINO FR5
List price $8,699
A versatile 5 kg arm with 922 mm reach for everyday automation.
- Payload
- 5 kg
- Reach
- 922 mm
- Repeatability
- ±0.02 mm
- Axes
- 6

FR5 specifications
| Specification | Value |
|---|---|
| Payload | 5 kg |
| Reach | 922 mm |
| Repeatability | ±0.02 mm |
| Axes | 6 |
| TCP speed | 1 m/s |
| Arm weight | 22 kg |
| Protection rating | IP54 (IP65 optional) |
Which FR5 variant?
| Specification | FR5 This page | FR5-WML |
|---|---|---|
| Type | Standard series | Welding variant |
| Payload | 5 kg | 5 kg |
| Reach | 922 mm | 1,900 mm |
| Repeatability | ±0.02 mm | ±0.1 mm |
| TCP speed | 1 m/s | 2 m/s |
| Arm weight | 22 kg | ≤45 kg |
| List price | $8,699 | $13,499 |
- Choose the FR5-WML instead if you need FAIRINO’s welding configuration with more reach: same 5 kg payload, 1,900 vs 922 mm reach, looser repeatability (±0.1 vs ±0.02 mm), faster TCP speed (2 vs 1 m/s), heavier arm (≤45 kg vs 22 kg), list price $4,800 higher.
When to consider the FR5
The FR5 is a useful starting point for a general handling or machine-loading cell when both the load and complete motion path fit. Compare the whole configuration, including tooling, interfaces, and process requirements, instead of choosing by the number in the model name.
Plan a potential application: Cobot machine tending · Cobot pick and place. Selection depends on the complete tool load, motion path, process, and cell assessment.
Check these details before choosing
- Allow for a dual gripper carrying finished and unfinished parts at the same time.
- Check clearance through the machine door with the part held in its required orientation.
- Define the machine-ready, clamp-confirmed, and cycle-complete sequence before specifying the controller interface.
Compare nearby FAIRINO options
| Model | Payload basis | Reach | Repeatability |
|---|---|---|---|
| FAIRINO FR5 | 5 kg | 922 mm | ±0.02 mm |
| FAIRINO FR10 | 10 kg | 1,400 mm | ±0.05 mm |
What to include in your FR5 quote
Request an itemized configuration and a complete project scope. Ask which items are supplied, optional, or your responsibility:
- Robot designation, controller, programming interface, cables, and software options.
- End effector, adapters, fixtures, part presentation, and any vision or tool-changing equipment.
- Mounting, machine interfaces, safeguarding, integration, and commissioning.
- Representative acceptance tests, operator training, delivery terms, warranty, and support responsibilities.
Share part dimensions, total carried load, a layout, and your cycle target. The response can then address a defined application rather than an arm-only price.
Discuss your applicationTechnical documents for FR5
Use the manufacturer documents to review the mounting, load arrangement, and control package. Ask for documentation matching the exact robot and software version in your quote.
Guides for this decision
Your process.
Our next conversation.
Tell us what you want to achieve. Get practical guidance on robot selection, application planning, and the next steps toward a successful automation purchase.