FAIRINO FR16
List price $11,599
A 16 kg payload in a 1,034 mm working envelope.
- Payload
- 16 kg
- Reach
- 1,034 mm
- Repeatability
- ±0.03 mm
- Axes
- 6

FR16 specifications
| Specification | Value |
|---|---|
| Payload | 16 kg |
| Reach | 1,034 mm |
| Repeatability | ±0.03 mm |
| Axes | 6 |
| TCP speed | 1 m/s |
| Arm weight | 40 kg |
| Protection rating | IP54 (IP65 optional) |
FR16 or FR10?
| Specification | FR16 This page | FR10 |
|---|---|---|
| Type | Standard series | Standard series |
| Payload | 16 kg | 10 kg |
| Reach | 1,034 mm | 1,400 mm |
| Repeatability | ±0.03 mm | ±0.05 mm |
| TCP speed | 1 m/s | 1.5 m/s |
| Arm weight | 40 kg | 40 kg |
| List price | $11,599 | $11,599 |
- Choose the FR10 instead if you need more reach: 10 vs 16 kg payload, 1,400 vs 1,034 mm reach, looser repeatability (±0.05 vs ±0.03 mm), faster TCP speed (1.5 vs 1 m/s), same list price.
When to consider the FR16
The FR16 trades some reach for a higher listed payload than the FR10. It is worth discussing when a heavier tool or part can be handled within a relatively compact layout. For a pallet or machine opening farther from the base, compare the FR20 before assuming the FR16’s load rating solves the application.
Plan a potential application: Cobot machine tending · Cobot palletizing. Selection depends on the complete tool load, motion path, process, and cell assessment.
Check these details before choosing
- Review part weight and tool weight separately; a heavy gripper can consume much of the available allowance.
- Check the farthest approach position, not only the distance to the fixture center.
- For case handling, demonstrate the bottom and top layers with the complete vacuum or mechanical tool.
Compare nearby FAIRINO options
| Model | Payload basis | Reach | Repeatability |
|---|---|---|---|
| FAIRINO FR16 | 16 kg | 1,034 mm | ±0.03 mm |
| FAIRINO FR10 | 10 kg | 1,400 mm | ±0.05 mm |
| FAIRINO FR20 | 20 kg | 1,854 mm | ±0.1 mm |
What to include in your FR16 quote
Request an itemized configuration and a complete project scope. Ask which items are supplied, optional, or your responsibility:
- Robot designation, controller, programming interface, cables, and software options.
- End effector, adapters, fixtures, part presentation, and any vision or tool-changing equipment.
- Mounting, machine interfaces, safeguarding, integration, and commissioning.
- Representative acceptance tests, operator training, delivery terms, warranty, and support responsibilities.
Share part dimensions, total carried load, a layout, and your cycle target. The response can then address a defined application rather than an arm-only price.
Discuss your applicationTechnical documents for FR16
Confirm repeatability and the other specifications for the exact configuration you order, and use the manual that matches the supplied robot and software version.
Guides for this decision
Your process.
Our next conversation.
Tell us what you want to achieve. Get practical guidance on robot selection, application planning, and the next steps toward a successful automation purchase.